Rack Tower for Raspberry Pi 4B/ 3B & Jetson Nano
- Delivery nationwide via The Courier Guy — R150 flat, free over R2,000
- Free collection from our Milnerton (Cape Town) warehouse
- Secure checkout — PayFast card payment or EFT
- Questions? WhatsApp us on +27 65 900 8570
Description
The Rack Tower is a 4-layer acrylic enclosure engineered for Raspberry Pi clusters, NAS servers, Jetson Nano arrays, and 2.5-inch disk storage setups. It is ideal for makers, educators, and students building compact, high-density computing clusters.
Four-layer modular enclosure design
The tower features four acrylic interlayers designed to securely house single-board computers and storage drives. A built-in acrylic handle on top allows the entire cluster assembly to be carried with ease.
High-airflow 5V RGB fan
An oversized 120mm 5V cooling fan mounts to the side bracket to deliver direct airflow across all layers. It runs directly from a Raspberry Pi 5V power pin and features a colourful LED halo during operation.
Broad board and drive compatibility
Flexible mounting positions support Raspberry Pi 4B, Raspberry Pi 3B, NVIDIA Jetson Nano, and 2.5-inch hard drives. Positioning holes are laid out to maintain open access to the Micro SD card slots after installation.
Straightforward assembly and installation
Smooth flat-head fixing screws and fool-proof positioning hole alignments simplify construction. The kit includes a dedicated long transparent screwdriver to assist with quick setup.
Complete hardware and heatsink kit
The package includes all required standoffs, rivets, mounting screws for four hard disks, and dedicated heatsink kits for both Raspberry Pi 4B and 3B boards.
Specifications
| Fan operating voltage | 5V |
In the box
| Right baffle | 1 |
| Left baffle | 1 |
| Middle interlayer | 4 |
| Fan bracket | 2 |
| 125mm Acrylic cylinder | 1 |
| 130mm Male and female rivet | 4 |
| M3x8mm Screw (for handle) | 2 |
| 120mm RGB LED 5V fan | 1 |
| M3x30mm screw (for 120mm Fan) | 4 |
| M3 nut (for 120mm fan) | 4 |
| M2.5x5+6mm copper column(for RPi) | 17 |
| M2.5 nut (for middle interlayer) | 17 |
| M3x5 wide head screw(for 4 hard disks) | 16 |
| Long transparent screwdriver | 1 |
| Installation instructions | 1 |
| Heat sink Kit for Raspberry Pi 4B | 4 |
| Heat sink Kit for Raspberry Pi 3B | 4 |
Reviews
No reviews yet — be the first to review this product.
From the same brand
Gravity: 4Pin I2C/UART Sensor Cable (10PCS)
Gravity: Analog CH4 Gas Sensor (MQ4) For Arduino
Gravity: Analog Gas Sensor (MQ2)
3xAAA Battery Holder
You might like
Waveshare PoE HAT (F) for Raspberry Pi 5 with Cooling Fan
GPIO V2.2 26-Pin Breakout Expansion Board for Raspberry Pi A and B
8mm Tubular Plastic Hardware Spacer
