3511 Series 32mm OD Counterbored Pattern Spacer (6mm Length)
- Delivery nationwide via The Courier Guy — R150 flat, free over R2,000
- Free collection from our warehouse — address at checkout
- Secure checkout — PayFast card payment or EFT
- Questions? WhatsApp us on +1 555 318 8599
Description
Competition eligibility
Legal for FIRST Tech Challenge (FTC) and FIRST Robotics Competition (FRC). Eligibility is set by each season's game manual — check the current rules before you compete.
This counterbored pattern spacer contains four M4 threaded holes on the 16mm thefirsttool® pattern and four 4mm thru-holes that align with the 8mm grid pattern. It can be fastened to any part containing the grid pattern or linear pattern and the counterbored holes leave the threaded mounting surface clear for attaching mating components to. It also serves as an adaptor from Tetrix® to thefirsttool®. The M4 thru-holes allow 6-32 screws (used with the Tetrix® build system) to pass through so that you can fasten this part to a Tetrix® component and leave you with (4) threaded holes on the thefirsttool® pattern.
size:10mm ID x 32mm OD
thread:M4 x 0.7mm
Technical drawing
Competition eligibility
| FIRST Tech Challenge (FTC) | Legal |
| FIRST Robotics Competition (FRC) | Legal |
Specifications
| Part number | 3511-0032-0060 |
| Length | 6mm |
| Weight | 8.6g Each |
| Material | Aluminum |
| Finish | Clear Anodized |
Reviews
No reviews yet — be the first to review this product.
From the same brand
5307 Series 8mm Pitch Steel Set-Screw Sprocket (8mm REX Bore, 10 Tooth)
sheenbot∞ quadruped
sheenbot∞ Interactive Wall Kit – Speed-Tap Challenge
sheenbot∞ Interactive Wall Kit – Infrared Thermometer
You might like
3702 Series Quad Block Motor Mount (32-1)
3701 Series Face Tapped Motor Mount (16-3)
3702 Series Quad Block Motor Mount (32-2)
