IR Remote Controller (2-Key)
- Delivery nationwide via The Courier Guy — R150 flat, free over R2,000
- Free collection from our warehouse — address at checkout
- Secure checkout — PayFast card payment or EFT
- Questions? WhatsApp us on +1 555 318 8599
Description
The IR Remote Controller (2-Key) is a compact, straightforward infrared transmitter designed for wireless project control. Featuring two programmable buttons, it is ideal for students, hobbyists, and makers looking for an easy way to trigger robots or switch projects on and off remotely.
Simple two-button operation
The controller provides dedicated ON and OFF buttons for immediate remote switching. With custom microcontroller programming, these keys can also be mapped to paired actions such as moving forward and backward.
Standard NEC protocol encoding
Transmissions use the standard 38kHz NEC encoded format with device address 0x00FF. The ON key transmits command 0x02, while the OFF key sends command 0x98.
Reliable transmission range and angle
The remote sends signals over a distance exceeding 8 metres with a 60-degree transmission angle. This ensures dependable wireless communication across open rooms and test areas.
Slim ultra-low power build
Measuring 86 x 40 x 6 mm with a 0.125mm PET surface, the enclosure is lightweight and pocket-sized. It consumes only 3 to 5 uA in standby and 3 to 5 mA during active transmission.
Included battery and robot compatibility
A CR2025 coin cell battery is included so you can start operating immediately. It pairs directly with compatible robotics platforms, including the MiniQ Discovery, MiniQ 2WD, and 4WD MiniQ V2.0 kits.
Specifications
| Encoded Format | NEC, Address is 0x00FF |
| Assign Buttons | ON(0x02) and OFF(0x98) |
| Battery Type | CR2025 coin cell |
| Frequency | 38Khz |
| Transmitting Range | >8m |
| Transmitting Angle | 60° |
| Facial materials | 0.125mm PET |
| Current | 3-5uA( Quiescent)/3-5mA(Dynamic) |
| Dimensions | 86x40x6mm(3.39x1.57x0.24") |
In the box
| IR Remote Controller (2-Key) x1 (include battery) | 1 |
Reviews
No reviews yet — be the first to review this product.
From the same brand
Lite Carrier Board for LattePanda Mu Compute Module (USB 3.0, Ethernet, PCIe 3.0, M.2 M key, HDMI)
Full-Function Evaluation Carrier Board for LattePanda Mu Compute Module
Gravity: 4Pin I2C/UART Sensor Cable (10PCS)
Gravity: Analog CH4 Gas Sensor (MQ4) For Arduino
You might like
830-Point Solderless Breadboard, Power Supply Module & 65pcs Jumper Wire
DIY Electronic Universal Circuit Matrix Board (4-Piece Pack) - 5x7cm
