Gravity: I2C OLED-128x64 Display

The Gravity: I2C OLED-128x64 Display is an Arduino-compatible 0.96-inch self-luminous display module driven by the SSD1306 IC. Featuring a protective aluminium alloy bezel and standard Gravity I2C connectivity, it is ideal for students, makers, and hobbyists designing compact wearables and portable electronics.

Self-luminous high-contrast display

The 0.96-inch OLED screen delivers 128x64 pixel resolution on a blue background, offering faster response speeds, thinner profiles, lower power consumption, and better shock resistance than traditional LCDs. It provides a typical brightness of 60 cd/m2 with refresh rates reaching up to 60 fps.

Protective aluminium alloy bezel

An integrated aluminium alloy frame protects the delicate display glass from scratches, impacts, and mechanical damage during everyday project use.

Standard Gravity I2C interface

The module uses the standard Gravity I2C pinout for plug-and-play wiring with Arduino and Genuino 101 development boards. It operates across a wide 3.3V to 5V voltage range and consumes approximately 22.75mA at full-screen illumination.

Wearable and compact mounting design

Measuring 41.20 x 26.20 mm and weighing only 15 g, the board integrates four M3 mounting holes spaced at 35 x 20 mm for easy installation into custom enclosures and wearable devices powered by compact controllers like the Beetle or CurieNano.

Included accessories and hardware

Each unit comes with one Gravity I2C OLED-128x64 display and one Gravity I2C PH2.0 4-pin cable ready for rapid assembly.

Downloads & documentation

• Product wiki (DFRobot)