1.10 Programming the sheenbot

This section provides hands-on programming examples using Mind+ to interact with various sheenbot∞ components. You'll use visual blocks to build and upload programs that control and respond to:

• The OLED screen
• Buttons
• RGB lights
• Microphone
• Gyroscope
• RFID reader
• Speaker

Connect the sheenbot to the computer using the Type-C cable plugged into the port marked on the Figure below.

Use visual blocks to create your program and then upload it to the sheenbot.

• Tips:
  • Ensure all necessary extensions are installed before programming
  • Save your projects frequently to avoid data loss
  • Verify that the correct board and extensions are selected in Mind+
  • Restart Mind+ if you encounter any connection or upload issues

_{Figure 1.10a: Connecting the sheenbot to the computer}