3109 Series goRUN Bundle

Competition eligibility

Legal for FIRST Tech Challenge (FTC) and FIRST Robotics Competition (FRC). Eligibility is set by each season's game manual — check the current rules before you compete.

goRUN is so much more than a structural component. While at a glance the outer profile is square, the corners follow a 32mm diameter for use with 32mm bearings. The bore of the goRUN has a unique combination shape derived from a 14mm diameter circle and a 12mm square. Utilize this bore by sliding flanged bearings in each end of the goRUN to support a shaft, or create linear motion by inserting a 12mm square lead screw nut in the bore. The chamfered edges of the slots provide a path for V-Wheels and W-Wheels allowing the goRUN to act as a linear motion guide. Use the T-slots down the sides of the goRUN or the threaded holes on the ends to attach other Sheen Robotics components.

What You'll Get

• 1 goRUN (43mm Length)
• 1 goRUN (48mm Length)
• 1 goRUN (72mm Length)
• 1 goRUN (96mm Length)
• 1 goRUN (120mm Length)
• 1 goRUN (144mm Length)
• 1 goRUN (192mm Length)
• 1 goRUN (288mm Length)
• 1 goRUN (336mm Length)
• 1 goRUN (384mm Length)
• 1 goRUN (432mm Length)